Odisha Power Solutions

Introducing India’s first wall mounted smart power backup system, crafted to suit your every need. With a sleek and modern design, it is elegant and aesthetically pleasing with a lifespan of 10 years.

Key Features

• Zero maintenance (No water top up or maintenance required)
• 3x life (Lithium Ion batteries with extra long life)
• 3x charging speed(Gets fully charged within 2-3 hours)
• 3 modular batteries(Connects up to 3 batteries of 0.48 kWh each)
• Up to 15% more efficient(High efficiency cells that save energy)
• Connect your Regalia over the wifi and access your power information on any connected device.

Control and access power back up information, diagnostic and more through your smart phones.

Use the touch screen to view backup time, charging time or for configuration.

Luminous Zelio UPS is India’s most intelligent UPS with features such as Power back up time display in Hours & Minutes, Hassle Free battery water level maintenance, MCB protection and is equipped with Bypass Switch which keeps Supplying output from Grid even in case of UPS faults.

Key Features

• Power back up time display in hours & minutes
• 32 bit DSP Processor
• Battery Electrolyte Level Indicator glows whenever the battery requires water top-up
• Input mains protection through MCB
• Supports wide battery range, i.e. Flate Plate, Tubular & VRLA (SMF)

Eco Volt is a pure sine wave UPS with features such as Intelligent Water Level Indication which helps consumer to track battery water level hassle-free, low harmonic distortion makes UPS practically noiseless. Pure sine wave output makes it highly efficient and helps in save on electricity bills.

Key Features

• Rugged technology design for high performance and longer back-up time, specially suited for Indian power conditions
• Auto holiday mode preserves battery charge and safeguards battery life
• Supports a wide range of batteries with 3-step charging current and 4-step battery type selection
• Adaptive battery charging control technology (ABCC) ensures faster battery charging and enhances battery life up to 70%V

Electra Sine is a pure sine wave UPS with MCB Protection. The low harmonic distortion makes the UPS practically noiseless and the pure sine wave output makes it highly efficient and helps save on electricity bills.

Key Features

• Rugged technology design for high performance and longer back-up time, especially suited for Indian power conditions
• Auto holiday mode preserves battery charge and safeguards battery life

Electra Square series is yet another top selling UPS series of Luminous. It is built with advanced PCB programming, microprocessor and FSW transformer, making it highly efficient. Also, it does not create any humming noise, consumes less power and is capable of taking higher load.

Key Features

• Rugged technology design for high performance and longer back-up time, specially suited for Indian power conditions
• Auto holiday mode preserves battery charge and safeguards battery life

Eco Watt series is No. 1 selling UPS Product for Luminous. It is built with Advanced PCB programming, Microprocessor and FSW Transformer makes it highly efficient UPS hence it does not create humming noise, consumes less power and takes

Key Features

• Battery charging commences even at input voltage as low as 110V AC
• Four selectable charging profiles customized to different battery types
• Intelligent thermal management system keeps your system cool and shuts down the system during over temperature condition
• No – load shutdown and auto holiday mode preserves battery charge leading to longer battery life

Homes and commercial establishments have higher power needs. Also, frequent power cuts can hamper the overall performance of the appliances. Luminous Higher KVA offers high quality and reliable power back-up solution for running office and sensitive equipments.

Key Features

• High over-load handling capacity
• Installation and maintenance friendly
• Eco friendly: Say no to fumes, noise and pollution
• No user- action required: Automatic Start
• Intelligent battery charging mechanism

Rapid Charge is specially designed to cater the needs of areas where there are frequent power cuts and that too for short durations. It offers high KVA ratings that too on a single battery, thereby savings on space & money.

Key Features

• First single battery based UPS that is capable of running heavy power loads such as steam iron, heater, immersion rod, rice cooker etc.
• Twin output sockets for regular load as well as power load with intelligent output load optimization feature.
• Charges battery with full current even when the mains input voltage is as low as 95 Volt.
• Proprietary ‘Rapid Battery Charge’ (RBC) technology that can recharge the battery up to 60% faster.

Luminous online UPS delivers continuous power supply and keeps your computer led essential equipment protected during power cuts.

Its longer battery life and faster charging ensure a hassle free working of your computer.

Key Features:

• Automatic bypass in case of overload or internal fault
• Input Power Factor Corrector (PFC).
• Constant current & constant voltage charger.
• Cold Start: the unit can start on battery.
• Automatic restart after short circuit.
• Built in OVCD: withstand up to 450V AC input without.

.

Who says an UPS can’t run an entire house? With Luminous Cruze UPS, you get a power back-up solution that can literally run everything! Also perfect if you’re running a small business like a restaurant, a clinic or a petrol pump that runs sensitive or heavy load machinery.

Key features

• Less expensive to run than any generator of similar rating
• 100% safe to run sensitive equipment
• Automatically switches on during power cut
• Unique DSP design uses less components allowing faster feedback and precise action
• No fumes of burning fuels, No noise to keep environment clean and safe

Features

• Extra thick plates ensure long life
• Special alloy – very low battery maintenance
• Very good charge acceptance- suitable for frequent power cuts
• Level indicators enable easy maintenance

Features

• Extra thick plates ensure long life
• Special alloy-very low battery maintenance

Key Features

• Low antimony alloy used – very low maintenance
• Robust Tubular plates provide many years of service
• Excellent overcharge tolerance (Accepts very deep discharge-suitable for long power cuts)

Key Features

• Low antimony alloy used – very low maintenance
• Robust Tubular plates provide many years of service
• Excellent overcharge tolerance (Accepts very deep discharge-suitable for long power cuts)

Key Features

• Extremely high purity, corrosion-resistant proprietary spine alloy composition ensures longer battery service life
• Tubular plate construction ensures uniform distribution of positive active
• Extra-strong, flexible oxidation-resistant gauntlet for higher performance and extremely long life
• Plates designed for improved charge acceptance

Key Features

• Extremely high purity, corrosion-resistant proprietary spine alloy composition ensures longer battery service life
• Tubular plate construction ensures uniform distribution of positive active material for extremely long life and superior performance
• Extra-strong, flexible oxidation-resistant gauntlet for higher performance and extremely long life
• Plates designed for improved charge acceptance

Key Features

• Robust Tubular plates provide many years of service
• Excellent overcharge tolerance (Accepts very deep discharge-suitable for long power cuts)
• Low antimony alloy used – very low maintenanc

Extremely high purity, corrosion resistant proprietary spine alloy composition ensures longer battery service life

Extremely high purity, corrosion resistant proprietary spine alloy composition ensures longer battery service life

Luminous solar has both Mon-crystalline and Polycrystalline IEC certified PV modules with performance warranty of up to 25 Yrs. Range available with us are from 3 Watt to 300 Watt catering wide range of applications from rural to urban projects

Features

• Best in class conversion efficiency
• Anti-reflective coating and back surface field (BSF)
• Optically, Mechanically and Electrically tested
• Advance EVA encapsulation
• Strong lightweight Aluminium frame design
• Compliance to IEC standards

Technical specifications

• A+ grade high efficiency anti PID Mono/Poly crystalline cells
• Best in class conversion efficiency based on leading and innovative photovoltaic technology
• 25 years limited product and performance warranty

Luminous Solar PCUs with Inbuilt MPPT Charge Controller are specially designed for solar applications. These 1-Phase & 3-Phase PCUs are having high conversion feature. The DC Power generated from PV array is used to charge connected battery bank and also used to cater load through these PCUs. These PCUs being bi-directional have feature to charge batteries through grid also if Solar is not available.

Features

• MPPT based PCU’s
• Inbuilt O/P isolation transformer
• Bi-directional PCU
• Selectable source priority
• 32 bit DSP controller
• MOSFET/IGBT switching element
• MCB at battery and O/P Compliance to IEC standards

Technical specifications

• Inbuilt MPPT charge controller with excellent conversion efficiency
• Bi-Directional PCU with feature for battery charging through grid also
• LCD display for local monitoring of system parameters, programming the desired settings and fault finding
• Selectable source priority features to choose source priority as per availability and designed application
• Advanced communication interface facilitates users to continuously monitor performance of installed system (optional)

Grid Tie UPS are power UPS that convert direct current (DC) electricity into alternating current (AC) with an ability to synchronize to interface with a mains line. Grid Tie UPS are designed to quickly disconnect from the grid if the utility grid goes down. It ensures that in the event of a blackout, the grid tie UPS will shut down to prevent the energy it transfers from harming any line workers who are sent to fix the power grid.

Features

• Transformerless UPS
• Dual MPPT charge controller
• Wide operating voltage
• IP 65 enclosure
• Modbus comms

Technical specifications

• Residential solar with flat roofs
• Residential solar with multiple pitched roofs
• Residential solar with partial shading
• Residential solar with odd number of modules
• Residential solar with odd number of modules

Luminous Solar Batteries are C10 rating deep cycle batteries specially designed for longer back up. We have solar batteries of rating starting from 20Ah to 200Ah in 3 yrs. & 5 yrs. warranty.

Features

• Long life cycles
• Topping up frequency in 8 to 10 months
• High temp performance
• Overcharging sustainability
• Ah efficiency of 90% & Wh efficiency of 80%

Technical Specifications

• Ah efficiency of 90% & Wh efficiency of 80%
• 1500 Cycles@80% & 5000 Cycles@20% DOD
• Higher AH Efficiency >90% & WH Efficiency > 80%
• Self-discharge rate – 3% per month @ 27˚C

A MPPT (Maximum Power Point Tracking) is a technology in which there is DC to DC conversion that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels down to the lower voltage needed to charge batteries without loss of power.

Features

• Smart tracking algorithm
• Four stage battery charging – bulk, absorption, Float & equalize
• Automatic selection of battery voltage
• Higher input voltage from PV module
• Easy upgradtion

Technical Specifications

• LED/ LCD display.
• Peak conversion efficiency – >97%
• 4 stage battery charging – bulk, absorption, float & equalize
• Battery voltage selection: 12V/24V/36V/48V/60V

Luminous Solar Wires & Cables are specially designed for connecting PV Modules for complete solar system installation. These wires & cables are UV protected with lowest conductor resistance and high mechanical strength for varying weather conditions.

Features

• Electrolytic grade 99.99% pure copper
• Oxygen index more than 30%
• Virgin FR grade PVC

Technical specifications

• Electrolytic multi strand annealed copper conductor
• FR PVC compound for insulation
• UV Protected compound for sheathing

Luminous Solar UPS are hybrid UPS available in the range of 500VA, 850VA & 1500VA with inbuilt charge Controllers with wide choice of PV modules from 400Wp to 1000Wp. With unique feature of iSOT, it saves 1.5 to 3 Units per day thus substantial savings.

Features

• Intelligent logic control (simultaneous charging solar-mains with priority to solar)
• Pure sine wave UPS with 85% efficiency
• ISOT: Intelligent solar optimization technique
• Inbuilt charge controller with 98% efficiency
• Intelligent battery monitoring
• Battery charging commences at 110Volt mains voltage
• Equipped with battery type selection
• Output for both AC as well as DC.

Technical specifications

• Battery safety – deep discharge protection, overcharge protection, short circuit protection, battery type selection
• Pure sine wave UPS output
• DC load O/P of 12V 20amp in 850VA and 12V 5Amp in 1500VA
• Wide choice of panel: 400W to 1000W (500VA , 850VA & 1500VA)

Luminous Solar Retrofit Solution is an upgrade of charge controller which converts conventional UPS to solar system. With unique mode selection provision it can be configured according to need & power conditions. It also has battery selection switch to suit the existing battery.

Features

• Easy up-gradation
• Solar optimization technique
• Three modes selections
• LED/ LCD indications
• Inbuilt reverse polarity & reverse current protection
• Wide choice of PV modules can be connected

Technical specifications

• System rating: 12Volt/20Amp,48V/50Am, 96V/50Am, 120V/50Am
• Battery type selection switch
• Four operational modes: auto/manual/charger/100% solar
• Compatible with wide range of PV panel array wattage
• Operating temperature range – 0˚C to 45˚C
• Inbuilt protections for short circuit, over temp, over voltage, over current, over charge, deep discharge

Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has option of USB charging & dusk to dawn feature. It comes in ratings of 6/10/20Amp. Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output. Option of SMF and Lead Acid Battery selection.

Features

• Automatic selection of 12v/24v battery
• Aesthetic & compact design
• 98% efficiency
• Fuse-less electronic & software controlled protections
• USB port
• Option of SMF and lead acid battery selection
• Load controller with LVD & dusk to dawn feature

Technical specifications

• PWM based technology
• Automatic battery voltage selection of 12/24Volt (Available in 10amp & 20 Amp)
• In built low voltage disconnect (LVD) & 20% extra power than rated capacity
• 125 Watt panels in 12 system in 6Amps ; 200Watt & 400Watt panels in 12/24Volt system in 10Amps
• 400Watt & 800Watt panels in 12/24Volt system in 20Amps

Luminous Solar Home Lamp 20Wp is a powerful solar lamp which can be easily charged during cloudy days with 20Wp solar PV module. It has two 7.5Ah batteries inbuilt and provision to connect external 12V any rating battery for more back up. It has two external LEDs and one inbuilt LED on the front panel each of 3W. It can charge mobiles, run DC fan.

Features

• Dual charging with preference to Solar
• Stand for PV panel with proper angle
• LED based general lighting system
• Mobile charger with independent output
• Main power On/Off switch
• Total system shutdown after battery low point
• Over current, short circuit protections

Technical Specifications

• 4 step light intensity regulation with night lamp mode; >56 Hrs. Back up on intensity level-4 and >120 Hrs. Backup on intensity level-1 (with one lamp)
• Two 3Watt SMD LED external & one inbuilt at the front
• 12V DC regulated output for extra DC Lamp, DC Fan
• Two 7.5Ah SMF battery inbuilt
• 20Watt mono crystalline panel

Luminous Solar Home Lamp 10Wp is a high efficiency device and along with 10Wp Solar PV module, it is easy to charge even during cloudy days. With its 1W torch at the front, mobile charging option & compact design, it is portable too. Also, it has two external LEDs of 3W each, equivalent to 14W CFL.

Features

• Dual charging with preference to Solar
• Stand for PV panel with proper angle
• LED based general lighting system
• Mobile charger with independent output
• Main power On/Off switch
• Total system shutdown after battery low point
• Over current, short circuit protections

Technical Specifications

• 5 step light intensity regulation with night lamp mode; >25 Hrs Back up on intensity level-5 and >100 Hrs. backup on
• intensity level-1 (with one lamp)
• Two 3Watt SMD external LED
• 1Watt LED torch (long beam up to 25 meters).
• One 7.5Ah SMF battery inbuilt
• 10Watt Mono crystalline panel

Luminous Solar LED Lamp is a highly reliable & energy efficient lamp with plug ‘n’ play feature. Its long life LEDs (>50000Hrs.) gives an output equivalent to 14W CFL.

Features

• Constant light output
• LED life >50,000 Hrs
• Low power consumption (3.5W)
• Portable with multiple mounting option
• Plug ‘n’ Play feature
• Safety: reverse polarity protection
• LVD: low voltage disconnect

Technical Specifications

• 5Watt
• Protection against overvoltage (10.8V-24V), battery deep discharge
• Constant current PWM control
• Ingress protection-40
• Compatible with all DC source available in the market – 12V Battery, Charge controllers, DC adaptors, PV panel ≥5W.

Luminous Solar Pocket LED Lamp 2W is lithium Ion based lamp with a backup of 6-7 Hrs. on single charging. It can be charged by USB, any mobile adapter & solar PV module of 3Wp/6V.

Features

• Constant light output
• LED life >50,000 Hrs.
• Low power consumption(2W)
• Portable with multiple mounting option
• Latest technology li-ion battery
• Can be charged with mobile charger

Technical Specifications

• 2Watt
• Backup: 6-7 Hrs.
• Charging voltage 5V DC
• Protection against Overcharging of battery
• Solar panel recommended 3Wp/6V

Luminous Solar Cracker is also called as mini UPS and can run 3nos. of 15Wp CFL at a time with a backup of 1.5 Hrs. It can also be charged through solar PV module of 20Wp. It has an aesthetic design & is very handy.

Technical Specifications

• Provision to connect 12V SMF battery
• Solar PV module connection provision
• Longer back up
• Provision to connect 15Watt CFL (3 Nos.)
• Portability
• Overload , short circuit & battery deep discharge protection
• Four visual indicators

Features

• Recommended Solar PV panel capacity – 20 Watt
• Output is 180Volt DC
• Cracker is without battery model
• Inbuilt protections for short circuit, over temperature, over voltage, over current, over charge, deep discharge

Luminous Solar Lantern connects rural with its unique mobile charging option and enlightens millions of lives with >9Hrs of backup which is ideal for general lighting and reading. It can be charged from mains too. It can also be used upside down.

Features

• PWM controlled charging
• High power SMD LEDs
• Intelligent product design
• Multiple pin mobile charger
• High class diffused acrylic cover
• System shutdown after battery low point
• Over current, short circuit protection
• Visual charge Indication

Technical Specifications

• 3 step control intensity ; back up time on full charging condition is 65 hrs on lowest level and 10hrs on highest level
• SMD LEDs with 90% efficiency
• 5Ah/6V SMF battery inbuilt
• 3Watt/6V poly crystalline PV module
• Inbuilt protections for short circuit, over temp, over voltage, over current, over charge, deep discharge

Luminous Solar DC fan is a 4 blade metal finish product with two step speed control. It comes with plug ‘n’ play feature & gives a back up of 15Hrs with 20Ah Battery.

Features

• Aesthetic design
• Low power consumption (10W)
• Plug ‘n’ play feature
• Long backup
• Speed selection
• Plastic blades
• Safety: reverse polarity protection
• LVD: low voltage disconnect

Technical Specifications

• 12V battery operated
• Current consumption @ 12V DC: 0.7 Amp (low)/ 1.2 Amp (high)
• RPM @ 12V DC: 1000 (low) / 1400 (high)
• Inbuilt protections for Short Circuit, Over temp, Over voltage, Over current, Over charge, deep discharge